1.
Review product certificate before installing fire pump. Specification,
model and performance of fire pump should be in accord with design
requirements and install the fire pump according to installation
instructions;
2.
Review foundation concrete strength, isolation mounting, coordinate,
elevation, size and bolt hole position of fire pump before installation
of fire pump;
3.
Installation of fire pump should confirm to the related regulations of
current national standard of general specification of mechanical
equipment installation engineering construction and acceptance and fan,
compressor, pump installation project construction and acceptance
specification;
4.
Review distances between fire pumps and between fire pump and wall or
other equipment and it should meet the requirements of installation,
operation and maintenance management;
5.
Control valve on the suction pipe of fire pump should be installed
after fire pump is fixed on the foundation, diameter of which should be
no less than water inlet diameter of fire pump. Control valve without
reliable locking device is prohibited to adopt;
6.
Silencing check valve, control valve and pressure gauge should be
installed on outlet pipe of fire pump; pressure gauge and pressure
switch should be installed on general outlet pipe of system; a buffer
device should be added when install the pressure gauge. Cock should be
installed between pressure gauge and buffer device; pressure gauge range
shall be 2 - 2.5 times of system working pressure without the design
requirements.
Manufacturers recommend: Shenlong stainless steel water pump
Keywords:Fire pumps, installation requirements
没有评论:
发表评论