Multi - stage centrifugal pump installation matters

   
1, the installation of pipe weight should not be in the pump, or easy to damage the pump;

2, the installation must be tightened anchor bolts, and every interval to check the pump should be checked to prevent loosening, so as to avoid violent vibration of the pump starts and affect the performance of the pump;

3, the pump should be carefully checked before the pump runner affect the operation of the hard material (such as stones, iron, etc.) to avoid damage to the pump running over-current components:

4, in order to facilitate the maintenance and use of safety, in the import and export pipeline to install a control valve and pump near the entrance to install a pressure gauge for high-lift pump, in order to prevent water hammer, but also in the export gate valve installed A check valve to cope with sudden power loss and other accidents and production, so as to ensure that the pump in the best conditions of operation, to extend the life of the pump;

5, the pump has a suction for the occasion, should be equipped with a bottom valve, and the inlet pipe should not have too many corners, and shall not have leakage, leakage phenomenon, so as not to affect the pump suction performance;

6, in order not to impurity into the pump and block the flow of the impact of performance, should be installed in front of the pump inlet filter;

7, install the pipeline before turning the pump rotor parts, should be no friction or stuck phenomenon, otherwise the pump should be opened to check the cause.

Manufacturers recommend: Shenlong submersible pump

Keywords:Multistage Centrifugal Pumps, Installation,ShenLong