Stainless steel submersible pump maintenance is divided into three categories

China's stainless steel submersible pump repair is divided into three categories, the following for you one by one, I hope for your help:

First, the small repair of stainless steel submersible pump

1, mechanical seals: replacement, cleaning

2, check the bearing and oil chamber, replace the transformer oil

3, to eliminate defects found in the operation and leakage, check and tighten the Ministry of bolts.

4, cleaning and maintenance of their valves

Second, the stainless steel submersible pump in the repair:

1, including minor repairs.

2, overhaul mechanical seals, repair and replacement parts.

3, disintegration, check the parts of the wear, corrosion and erosion degree, to be repaired or replaced.

4, check the shaft wear, corrosion and straightness, repair or replacement.

5, check the bearing wear, scraping study Bush, adjust the gap, and the replacement of bearings.

6, check and adjust the impeller seal ring, sleeve, gland, shaft seal and other ministries.

7, check the static balance of the impeller and rotor dynamic balance.

8, inspection, cleaning and repair motor.

Stainless steel submersible pump maintenance is divided into three categories

Third, the stainless steel submersible pump overhaul:

1, including the repair content

2, more, good impeller

3, replace the pump shaft

4, the pump body thickness, identification, to do the necessary repairs

5, measure and adjust the level of the pump, rust corrosion.

Manufacturers recommend: Shenlong stainless steel submersible pump

Keywords:stainless steel submersible pumps, small repair, repair, overhaul