Stainless steel submerged pump is widely used in chemical, petrochemical, smelting, dyestuff, pesticide, pharmaceutical, rare earth, chemical fertilizer and other industries, transporting non-suspended solid particles, not easy crystallization, the temperature is not higher than 100 ℃ Acid (hydrochloric acid, dilute sulfuric acid, formic acid, acetic acid, butyric acid) and other corrosive media the best equipment.
Submerged Pump Features
1, pump for the vertical submerged pump, pleasing in appearance, directly installed in the medium to be transported on the storage, no additional footprint, thereby reducing infrastructure investment.
2, the abolition of the mechanical seal to solve the other liquid pumps due to mechanical seals easy to wear and maintenance of the need to be frequent trouble, saving the pump running costs and improve efficiency.
3, the use of a unique double-balanced impeller note for the transport of non-solid particles and other clean media, low noise and high efficiency; the use of open double-balanced impeller for conveying unclean with solid particles and short Fiber of the liquid, running smooth, not blocked.
Assembly and disassembly of stainless steel submerged pump
Assembly and disassembly
1, liquid pump assembly sequence
(1) Install the bearings on the bearing housing and the housing, respectively.
(2) Felt ring installed in the bearing cover A, C and bearing box.
(3) the bearing cover B, C mounted on the bearing seat and bolted.
(4) will be installed bearing the bearing box to wear on the shaft, screw on the round nut, and the bearing end cover armor in the bearing box.
(5) The shaft into the bearing, with bolts, screw on the adjustment screw, and bearing installed in the bearing seat, the water trap in the lower bearing at the appropriate location.
(6) Attach the connecting pipe to the bearing seat and install the pump cover on the lower part of the connecting pipe. Install the impeller on the lower part of the shaft and tighten it. Install the pump body front cover in turn and fix it with bolts. Adjust the gap between the impeller and the front cover, (control in the 1--1.5mm) adjusted with a nut, bolt fastening.
(7) motor bearing installed in the bearing bracket with bolts on the shaft at the top of the coupling components, and the motor coupling with a fastening screw in the motor shaft head, the motor mounted on the motor bearing, And fastened with bolts and nuts.
(8) from the pump in the order will be asbestos pad, the liquid elbow, the liquid pipe fittings installed and fixed on the bearing seat.
Submerged Pump Features
1, pump for the vertical submerged pump, pleasing in appearance, directly installed in the medium to be transported on the storage, no additional footprint, thereby reducing infrastructure investment.
2, the abolition of the mechanical seal to solve the other liquid pumps due to mechanical seals easy to wear and maintenance of the need to be frequent trouble, saving the pump running costs and improve efficiency.
3, the use of a unique double-balanced impeller note for the transport of non-solid particles and other clean media, low noise and high efficiency; the use of open double-balanced impeller for conveying unclean with solid particles and short Fiber of the liquid, running smooth, not blocked.
Assembly and disassembly of stainless steel submerged pump
Assembly and disassembly
1, liquid pump assembly sequence
(1) Install the bearings on the bearing housing and the housing, respectively.
(2) Felt ring installed in the bearing cover A, C and bearing box.
(3) the bearing cover B, C mounted on the bearing seat and bolted.
(4) will be installed bearing the bearing box to wear on the shaft, screw on the round nut, and the bearing end cover armor in the bearing box.
(5) The shaft into the bearing, with bolts, screw on the adjustment screw, and bearing installed in the bearing seat, the water trap in the lower bearing at the appropriate location.
(6) Attach the connecting pipe to the bearing seat and install the pump cover on the lower part of the connecting pipe. Install the impeller on the lower part of the shaft and tighten it. Install the pump body front cover in turn and fix it with bolts. Adjust the gap between the impeller and the front cover, (control in the 1--1.5mm) adjusted with a nut, bolt fastening.
(7) motor bearing installed in the bearing bracket with bolts on the shaft at the top of the coupling components, and the motor coupling with a fastening screw in the motor shaft head, the motor mounted on the motor bearing, And fastened with bolts and nuts.
(8) from the pump in the order will be asbestos pad, the liquid elbow, the liquid pipe fittings installed and fixed on the bearing seat.
Manufacturers recommend: Shenlong stainless steel submersible pump
Keywords:Stainless steel submersible pumps, assembly and disassembly
没有评论:
发表评论