When you want to use the fountain pump, pay attention to these aspects

When the fountain pump products in the use of time to pay attention to what aspects can guarantee the normal use of the product? We suggest that in the use of the time need to pay attention to these aspects.

1, the product cable can not be broken or broken.
2, with 500-volt watch to see the insulation resistance, not less than 0.5 megohm, if below this value, to turn on the water, venting, drying or drying.
3, see the fountain pump venting, water holes, put the oil hole and the cable connector seal is not loose, if there is a need to tighten loose.
4, before the start to see all the circuits, switches, to see if the wiring is not accurate and reliable, and check the motor is not accurate turn direction, if no doubt, can be put into the water use.
5, into the water use, must not make the cable force, to avoid damage to the cable seal.
6, operation, should always observe the water level changes in the fountain, the motor must not be exposed to the water, can not fall into the mud, to avoid affecting the motor cooling and burn out the winding. Should be with the fountain pool water level changes, at any time, such as water reduction or suspension, should immediately identify the cause or downtime view.
7, before use, 50 hours in the future, should check the seal is not good, the next monthly view once, with the motor rotor and stator seal between the shielding sleeve is not good.
8, winter, proper storage of fountain pump to avoid cold weather in the north cold!
Manufacturers recommend: Shenlong stainless steel fountain pump
Keywords:Fountain pump, cold climate, freezing bad