When the fountain pump in the use of trips encountered when the situation, to immediately stop the operation of the equipment, and then check, then the next check on the layout of a brief introduction.
First of all, to check whether the three-phase power supply balance, balance, then continue to the next step. Check the overload protector is normal, and then cut off the power to confirm whether the leakage pump, as well as power lines.
Second, open the grille, see the impeller has not been stuck, if the impeller is flexible to the next step.
Measure the resistance and verify that it is less than 50 ohms. If it is exceeded, check the current of the overload protection device. Finally check the fountain pump cable, and promptly repair the problem.
First of all, to check whether the three-phase power supply balance, balance, then continue to the next step. Check the overload protector is normal, and then cut off the power to confirm whether the leakage pump, as well as power lines.
Second, open the grille, see the impeller has not been stuck, if the impeller is flexible to the next step.
Measure the resistance and verify that it is less than 50 ohms. If it is exceeded, check the current of the overload protection device. Finally check the fountain pump cable, and promptly repair the problem.
Manufacturers recommend: Shenlong stainless steel fountain pump
Keywords:Fountain pump, tripping, inspection procedure
没有评论:
发表评论