Fountain pump whether ready to long-term use or in the long-term use, in the conservation of the time are required to carry out demolition and basic inspection. The fountain pump manufacturer then teaches you how to disassemble and inspect the product.
When the product is running, if the "click" and the sound and the speed of operation in hand rotating the rotor when there is laborious feeling that the bearing raceway avulsion or dry, and need to replace or run for maintenance. In the bearing when the issue of abnormal sound when the rotor by hand when the rotation can not be determined if the dead point is the product within the ball rack damaged, or broken ball and inner ring, and this time must replace the bearings, so as to avoid a Of the damage caused by greater damage.
Fountain pump manufacturers prompt the demolition of the product before and after the end cover and the base of the joints at the mark, repaired as is installed.
When the product is running, if the "click" and the sound and the speed of operation in hand rotating the rotor when there is laborious feeling that the bearing raceway avulsion or dry, and need to replace or run for maintenance. In the bearing when the issue of abnormal sound when the rotor by hand when the rotation can not be determined if the dead point is the product within the ball rack damaged, or broken ball and inner ring, and this time must replace the bearings, so as to avoid a Of the damage caused by greater damage.
Fountain pump manufacturers prompt the demolition of the product before and after the end cover and the base of the joints at the mark, repaired as is installed.
Manufacturers recommend: Shenlong stainless steel fountain pump
Keywords:Fountain pumps, inspection, repair
没有评论:
发表评论