The main features of stainless steel pipeline pump

Horizontal stainless steel pipe pump main features

1. Stable operation: the absolute concentricity of the pump shaft and impeller excellent balance between static and dynamic to ensure smooth operation, no vibration.

2. Leakproof: Carbide seal different materials to ensure the transmission of different media without leakage.

3. Low noise: two low-noise bearings under the support of the pump, smooth operation, in addition to the motor weak sound, the basic no noise.

4. Low failure rate: the structure is simple and reasonable, the key part of the use of world-class quality of support, machine trouble-free working hours greatly increased.

5. Easy maintenance: replacement of seals, bearings, simple and convenient.

6. Land area more provinces: export to the left, right, up three directions, then the pipeline layout installation, save space.

Steel chemical pipeline pump before starting preparation:

1, the test motor is correct, from the top of the motor to the pump as clockwise rotation, test time is shorter, so as not to make mechanical

Sealed dry wear.

2, open the exhaust valve so that the liquid filled the entire pump, to be closed after the exhaust valve.

3, check the various parts are normal.

4, Hand pump to make lubricating fluid into the mechanical seal face.

5, high temperature type should be preheated, heating rate of 50 ℃ / hour, to ensure uniform heating of the ministries.

Horizontal stainless steel pipe pump Start:

1, fully open the import valve.

2. Close the spit line valve.

3, start the motor, observe the pump is running correctly.

4, adjust the outlet valve opening to the required conditions, such as the user at the pump outlet with a flow meter or pressure gauge, should be adjusted by the export

The valve opens to allow the pump to operate at the rated point listed in the performance data sheet. If the user has a flow meter or a pressure gauge at the pump outlet,

By adjusting the outlet valve opening, measuring the pump motor current, the motor in the rated current operation, or will cause the pump overload

Running (ie, high current operation) to the motor burned. Adjust the outlet valve opening is large and small and the pipeline conditions.

5, check the shaft seal leakage, normal mechanical seal leakage should be less than 3 drops / min.

6, check the motor, bearing temperature rise ≤ 70 ℃.

Manufacturers recommend: ShenLong stainless steel multi-stage pipeline pump

Keywords:Stainless steel pipe pump, the main features