Fountain submersible pump is the majority of farmers, industrial and mining enterprises extensive use of electric power irrigation and drainage equipment. The pump for agricultural irrigation and drainage, garden spray irrigation, fountain water, underground water, water towers, urban construction, industrial and mining enterprises and other occasions, water supply and drainage. The series of pumps is compact, lightweight and easy to move, bearing lubrication conditions, noise, long life. Double-ended overall seal, durable, safe and reliable.
Fountain submersible pump to use Note:
1, fountain submersible pump performance specifications should be consistent with the actual use, should be carefully checked before use.
2, fountain submersible pump equipped with the outlet pipe diameter and electric pump diameter should match.
3, the power capacity should be more than 5.5 kVA, three-phase, 380 volts, AC 50 Hz.
4, fountain submersible pump charged or pumping work, do not wash things in the vicinity, swimming or work, do not let the animals in the vicinity of water, to prevent electric pump leakage in case of electric shock casualties.
5, the fountain submersible pump shall not be a large amount of sand pumping water or muddy water.
6, fountain submersible pump suddenly does not turn, or a sudden decrease in water is not a normal phenomenon, to be shut down, be sure to cut off the power first, and then handling disassembly.
7, the pump should be equipped with a motor protection switch (the factory has a placement) protection switch action current has been set, the user shall not change.
8, at any time are not allowed to pull the cable pump. When using a comprehensive inspection cable, found damaged immediately before use.
9, the voltage fluctuation allows between 342 ~ 418 volts. If the electric pump is used far away from the power, should be appropriate to increase the wire cross-sectional area.
10, leads to a cable with a grounding mark of the yellow-green dual-core wire must be ground wire, such as no fixed ground, available 2 m metal rod buried in the river, lake shore, next to the ditch or wet soil line.
11, should be checked before use up and down cover oil hole screw loose oil leakage phenomenon. Outlet box on the middle of the m8 screw for the factory pressure test dedicated user is strictly prohibited loosening.
12, with 500v megger before operation to measure the cold state of the stator winding insulation resistance to the ground, the minimum shall not be less than 5mω, or can not be used, should be removed after the use of moisture.
13, should be used before turning 1min0 on the land, check the pump is running properly, steering is correct.
14, the pump may not dehydration run. In the pump work to pay attention to check the water level decline, shall not allow the pump to run in the water surface. The dive depth of the pump ranges from 0.5 to 3 meters.
15, the pump shall not fall into the mud, shall not be placed horizontally, it is recommended electric pump external basket or wire basket to prevent clogging water impoundment impoundment.
16, after the pump starts, if found that the water is very small or no water, that the direction of rotation of the pump anti-should cut off the power, the three-phase core wire in any two-phase location and then drive.
Fountain submersible pump to use Note:
1, fountain submersible pump performance specifications should be consistent with the actual use, should be carefully checked before use.
2, fountain submersible pump equipped with the outlet pipe diameter and electric pump diameter should match.
3, the power capacity should be more than 5.5 kVA, three-phase, 380 volts, AC 50 Hz.
4, fountain submersible pump charged or pumping work, do not wash things in the vicinity, swimming or work, do not let the animals in the vicinity of water, to prevent electric pump leakage in case of electric shock casualties.
5, the fountain submersible pump shall not be a large amount of sand pumping water or muddy water.
6, fountain submersible pump suddenly does not turn, or a sudden decrease in water is not a normal phenomenon, to be shut down, be sure to cut off the power first, and then handling disassembly.
7, the pump should be equipped with a motor protection switch (the factory has a placement) protection switch action current has been set, the user shall not change.
8, at any time are not allowed to pull the cable pump. When using a comprehensive inspection cable, found damaged immediately before use.
9, the voltage fluctuation allows between 342 ~ 418 volts. If the electric pump is used far away from the power, should be appropriate to increase the wire cross-sectional area.
10, leads to a cable with a grounding mark of the yellow-green dual-core wire must be ground wire, such as no fixed ground, available 2 m metal rod buried in the river, lake shore, next to the ditch or wet soil line.
11, should be checked before use up and down cover oil hole screw loose oil leakage phenomenon. Outlet box on the middle of the m8 screw for the factory pressure test dedicated user is strictly prohibited loosening.
12, with 500v megger before operation to measure the cold state of the stator winding insulation resistance to the ground, the minimum shall not be less than 5mω, or can not be used, should be removed after the use of moisture.
13, should be used before turning 1min0 on the land, check the pump is running properly, steering is correct.
14, the pump may not dehydration run. In the pump work to pay attention to check the water level decline, shall not allow the pump to run in the water surface. The dive depth of the pump ranges from 0.5 to 3 meters.
15, the pump shall not fall into the mud, shall not be placed horizontally, it is recommended electric pump external basket or wire basket to prevent clogging water impoundment impoundment.
16, after the pump starts, if found that the water is very small or no water, that the direction of rotation of the pump anti-should cut off the power, the three-phase core wire in any two-phase location and then drive.
Manufacturers recommend: Shenlong stainless steel fountain pump
Keywords: Fountain submersible pumps, power irrigation and drainage equipment, the use of
没有评论:
发表评论